RAM Mount Universal Clamp Mount with Belt Button Clip Product Detail
Category: RAM Mount RAM Mounts
Manufacturer: RAM Mount
Model No: RAP-B-121-304
SKU: RAPB121-304
Weight: 0.682 lbs
Share this item:
Need Assistance? We're here to help. (That's the GPS City Difference!)
For quick help selecting the right GPS unit, try our
GPS Selector Tool,
check specifications, or
compare GPS units. If you have a specific question about an
item, try entering your question using the
Questions & Answers section above - we usually respond on the same or next day. During our office hours 9AM - 6PM MDT, Mon-Fri, you can contact us using
, or reach us by phone at 1-866-GPS-CITY.
What's Included With The RAM Mount Universal Clamp Mount with Belt Button Clip? The RAM Mount Universal Clamp Mount with Belt Button Clip ships with the following items included:
RAM Mount Universal Clamp Mount with Belt Button Clip Description The RAP-B-121-304 Universal Temporary Clamp RAM Mount is a High Strength Plastic Mount with Non-Permanent Clamping Base and RAM Universal Button Clip Plastic Cradle. The mount is designed with a RAM 1 inch diameter patented rubber ball and socket system that has adjustment point at the cradle and base. With a twist of the arm knob, you can move the Belt Button mount to your optimum viewing position.
Mount Cradle Design:
The RAP-304 RAM Mount High Strength Plastic Holder is designed to connect to a standard plastic button knob found on the back of many Golf Course GPS, Cell Phones, GPS Units, Music Players and more.
Mount Cradle Plate:
The RAM-B-238 Marine Grade Aluminum Diamond Plate is designed to connected to the back of the mount cradle. The diamond plate has a 1.0 inch diameter rubber ball connected at right angles to the plate, which connects directly to the 1 inch arm socket. The cradle includes the required hardware to connect the plate to the cradle. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the RAM-B-238 Design Drawings (pdf file).
Mount Arm Design:
The RAP-B-201 RAM Mount Dual Socket Arm is a 1 inch B size Ball Dual Socket Arm made of High Strength Plastic. The arm is 3.0 inches long between socket centers. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAP-B-201 arm, take a closer look with the RAM-B-201 Aluminum Arm Design Drawings (pdf file).
Mount Base Design:
The RAP-B-121B RAM Mount High Strength Plastic Universal Clamp Mount Base fits a rail or edge lip from 5/8'' to a maximum of 1 1/4''. The mounting base can also accept a second ball giving you the ultimate double ball base.
To mount the base, simply place the clamp ends around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes, golf buggies or unusual shaped motorbike rails.
Note: The rail does not need to be perfectly round to mount this base.
Golf Course Buggy Mount:
The High Strength Composite Plastic Clamp Mount Base will allow you to connect this mount to a golf cart frame as a temporary solution. Simply connect the clamp around any rail on your Golf Cart, and you will be able to mount your Golf Course GPS, including the SkyCaddie GPS , Golflogix GPS and GolfBuddy GPS, in the perfect mounting position for viewing, while keeping the GPS easy to grab when you need it.
$Put some extra spending money in your pocket. Join our affiliate program
and start earning commissions on every sale referred to us. It's easy to do - complete instructions provided when approved. Sign up
here.
Got Questions?
? Pop over to the Q&A page for this item and ask away. We'll try to get you an answer in short order.
GPS Buzz
Check out the latest buzz on the UNIVERSAL CLAMP MOUNT WITH BELT BUTTON CLIP in our Buzz section.
The RAM-B-238 Marine Grade Aluminum Diamond Plate is designed to connected to the back of the mount cradle. The diamond plate has a 1.0 inch diameter rubber ball connected at right angles to the plate, which connects directly to the 1 inch arm socket. The cradle includes the required hardware to connect the plate to the cradle. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the 
The RAP-B-201 RAM Mount Dual Socket Arm is a 1 inch B size Ball Dual Socket Arm made of High Strength Plastic. The arm is 3.0 inches long between socket centers. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAP-B-201 arm, take a closer look with the 
The RAP-B-121B RAM Mount High Strength Plastic Universal Clamp Mount Base fits a rail or edge lip from 5/8'' to a maximum of 1 1/4''. The mounting base can also accept a second ball giving you the ultimate double ball base.
