RAM Mount TDS Recon PDA Tri-Pod Mount with Belt Clip Product Detail
Category: RAM Mount RAM Mounts
Manufacturer: RAM Mount
Model No: RAM-B-149ZBC-TD1
SKU: RAMB149ZBC-TD1
Weight: 1.189 lbs
Share this item:
Need Assistance? We're here to help. (That's the GPS City Difference!)
For quick help selecting the right GPS unit, try our
GPS Selector Tool,
check specifications, or
compare GPS units. If you have a specific question about an
item, try entering your question using the
Questions & Answers section above - we usually respond on the same or next day. During our office hours 9AM - 6PM MDT, Mon-Fri, you can contact us using
, or reach us by phone at 1-866-GPS-CITY.
What's Included With The RAM Mount TDS Recon PDA Tri-Pod Mount with Belt Clip? The RAM Mount TDS Recon PDA Tri-Pod Mount with Belt Clip ships with the following items included:
RAM Mount TDS Recon PDA Tri-Pod Mount with Belt Clip Description The RAM-B-149ZBC-TD1 TDS Recon PDA RAM Mount is a Marine Grade Aluminum TriPod Rail Mount with Quick Clip. It consists of the 1 inch diameter ball and socket system with RAM Mount Plastic Cradle for the TDS Recon PDA Series. Included with this mount is a Quick Clip Connector. Between the mount and the cradle is a belt clip attachment, allowing you to quickly move the TDS Recon from the Tri-Pod Mount to your belt clip (included).
TDS Recon PDA Mount Cradle Design:
The RAM-HOL-TD1 RAM Mount High Strength Plastic Cradle is designed to hold the following TDS PDA units,
TDS Recon PDA
The back of the cradle is connected to a round plate with ball. The ball gives the cradle the ability to connect to the RAM arm on this mount and also creates a ball and socket joint allowing you to move the cradle into many different viewing locations. All cables can stay connected to the TDS Ranger while in the RAM cradle.
TDS Recon PDA Mount Arm Design:
The RAM-B-201 RAM Mount Marine Grade Aluminum Dual Socket Arm is a 1 inch B size Ball Socket Arm with open socket ends. The arm is 3.0 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAM-B-201 arm, take a closer look with the RAM-B-201 Design Drawings (pdf file).
TDS Recon PDA Mount Base Design:
The RAM-B-231Z RAM Mount Powder Coated Marine Grade Aluminum Rail Base has a 1.0 inch diameter Rubber Ball designed to sit at right angles to the mounting rail. The Zinc Coated metal U-Bolt and nuts included are designed it fit on most motorcycle round handlebars, or any circular rail or pipe with diameter from 3/4 to 1.0 inch.
To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black rubber covers over the exposed ends of the u-bolt.
To help ensure you have the TDS Recon Mount you require, take a look at the list of available RAM TDS PDA mounts on the TDS Recon Mount List Page. Here you can select from pole/rail TDS mounts, suction cup TDS mounts, flat surface screw down TDS mounts and more bundled with the TDS Recon Cradle.
$Put some extra spending money in your pocket. Join our affiliate program
and start earning commissions on every sale referred to us. It's easy to do - complete instructions provided when approved. Sign up
here.
Got Questions?
? Pop over to the Q&A page for this item and ask away. We'll try to get you an answer in short order.
GPS Buzz
Check out the latest buzz on the TDS RECON PDA TRI-POD MOUNT WITH BELT CLIP in our Buzz section.
The RAM-B-201 RAM Mount Marine Grade Aluminum Dual Socket Arm is a 1 inch B size Ball Socket Arm with open socket ends. The arm is 3.0 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAM-B-201 arm, take a closer look with the 
The RAM-B-231Z RAM Mount Powder Coated Marine Grade Aluminum Rail Base has a 1.0 inch diameter Rubber Ball designed to sit at right angles to the mounting rail. The Zinc Coated metal U-Bolt and nuts included are designed it fit on most motorcycle round handlebars, or any circular rail or pipe with diameter from 3/4 to 1.0 inch.
