| The GPS SuperStore.™ Since 1994. |
 |
Canada |
 |
|
| You are currently shopping our GPS City Canada website, which ships to Canada only. To shop our USA website or to ship Internationally, please click the green button above. Prices will be in USD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
RAM Mount TDS Nomad PDA Zinc U-Bolt TriPod Rail Mount Specifications |
Please find below additional technical documentation and/or specifications for this item. This documentation may take the form of mechanical drawings, installation manuals, instruction manuals, and a table of specifications. |
RAM-B-149Z-TD3U |
The RAM-B-149Z-TD3 TDS Nomad PDA RAM Mount is a Marine Grade Aluminum Mount with a Zinc Coated U-Bolt Tri-Pod Rail Base and RAM Plastic Cradle for the TDS Nomad PDA. The mount is designed with a 1 inch diameter RAM ball and socket system that has adjustment point at the cradle and base. With a twist of the arm knob, you can move the TDS Nomad PDA mount to your optimum viewing position.
TDS Nomad PDA Mount Cradle Design:
The RAM-HOL-TD3 RAM Mount High Strength Plastic Cradle is designed to hold the following TDS PDA units,
The back of the cradle is connected to a round plate with ball. The ball gives the cradle the ability to connect to the RAM arm on this mount and also creates a ball and socket joint allowing you to move the cradle into many different viewing locations. All cables can stay connected to the TDS Nomad while in the RAM cradle.
TDS Nomad PDA Mount Arm Design:
 The RAM-B-201 RAM Mount Marine Grade Aluminum Dual Socket Arm is a 1 inch B size Ball Socket Arm with open socket ends. The arm is 3.0 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAM-B-201 arm, take a closer look with the RAM-B-201 Design Drawings (pdf file).
TDS Nomad PDA Mount Base Design:
 The RAM-B-231Z RAM Mount Powder Coated Marine Grade Aluminum Rail Base has a 1.0 inch diameter Rubber Ball designed to sit at right angles to the mounting rail. The Zinc Coated metal U-Bolt and nuts included are designed it fit on most motorcycle round handlebars, or any circular rail or pipe with diameter from 3/4 to 1.0 inch.
To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black rubber covers over the exposed ends of the u-bolt.
Note: If you are looking to use this mount in the elements, we suggest the RAM-B-231 Stainless Steel U-Bolt Mount.
TDS Nomad PDA Mount Options:
To help ensure you have the TDS Nomad Mount you require, take a look at the list of available RAM TDS PDA mounts on the TDS Nomad Mount List Page. Here you can select from pole/rail TDS mounts, suction cup TDS mounts, flat surface screw down TDS mounts and more bundled with the TDS Nomad Cradle. |
|
|
|
|
