RAM Mount Round Plate Motorcycle Mount RAM-B-149-202U Product Detail
Category: RAM Mount RAM Mounts
Manufacturer: RAM Mount
Model No: RAM-B-149-202U
SKU: RAMB149-202
Weight: 0.600 lbs
Share this item:
Need Assistance? We're here to help. (That's the GPS City Difference!)
For quick help selecting the right GPS unit, try our
GPS Selector Tool,
check specifications, or
compare GPS units. If you have a specific question about an
item, try entering your question using the
Questions & Answers section above - we usually respond on the same or next day. During our office hours 9AM - 6PM MDT, Mon-Fri, you can contact us using
, or reach us by phone at 1-866-GPS-CITY.
What's Included With The RAM Mount Round Plate Motorcycle Mount RAM-B-149-202U? The RAM Mount Round Plate Motorcycle Mount RAM-B-149-202U ships with the following items included:
RAM Mount Round Plate Motorcycle Mount RAM-B-149-202U Description The RAM-B-149-202 RAM Mount Marine Grade Aluminum Motorcycle Handlebar Mount with Stainless Steel U-Bolt Base consists of the 1 inch diameter ball and socket system with a RAM Universal 2.5 inch diameter Round Plate End with AMPS hole patten.
The mount plate end is designed to be a universal mounting solution for both RAM and non-RAM designed products. The hole pattern found on the 2.5 inch diameter Plate will connect to a large variety of third party cradles and mounts.
Mount Base Design:
The RAM-B-231 RAM Mount Powder Coated Marine Grade Aluminum Rail Base has a 1.0 inch diameter Rubber Ball designed to sit at right angles to the mounting rail. The Stainless Steel U-Bolt and nuts included are designed it fit on most motorcycle round handlebars, or any circular rail or pipe with diameter from 3/4 to 1.0 inch.
To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black rubber covers over the exposed ends of the u-bolt.
Mount Arm Design: The RAM Mount Dual Socket Arm (RAM-B-201) is a B Size 1 inch Ball Dual Socket Arm, made of Marine Grade Aluminum. The arm is 3 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends.
Mount End Plate Design:
The RAM-B-202 RAM Mount Marine Grade Aluminum Universal Plate has a 1.0'' diameter Rubber Ball connected at right angles to a 2.5 inch diameter round plate. The plate has pre-drilled holes in the base plate, including the universal AMPS hole pattern. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the RAM-B-202 Design Drawings (pdf file).
Note: This base plate will attach to any of the RAM plastic HOL holders, but generally the RAM-B-238 Diamond Plate is used.
$Put some extra spending money in your pocket. Join our affiliate program
and start earning commissions on every sale referred to us. It's easy to do - complete instructions provided when approved. Sign up
here.
Got Questions?
? Pop over to the Q&A page for this item and ask away. We'll try to get you an answer in short order.
GPS Buzz
Check out the latest buzz on the ROUND PLATE MOTORCYCLE MOUNT RAM-B-149-202U in our Buzz section.