RAM Mount Plastic Rail Mount Base with 1 inch Ball Product Detail
Category: RAM Mount RAM Mounts
Manufacturer: RAM Mount
Model No: RAP-B-231U
SKU: RAPB231
Weight: 0.063 lbs
Share this item:
Need Assistance? We're here to help. (That's the GPS City Difference!)
For quick help selecting the right GPS unit, try our
GPS Selector Tool,
check specifications, or
compare GPS units. If you have a specific question about an
item, try entering your question using the
Questions & Answers section above - we usually respond on the same or next day. During our office hours 9AM - 6PM MDT, Mon-Fri, you can contact us using
, or reach us by phone at 1-866-GPS-CITY.
RAM Mount Plastic Rail Mount Base with 1 inch Ball Description The High Strength Plastic Rail Base has a 1.0'' diameter Rubber Ball designed to sit at right angles to the mounting rail. The Rail 'U' Clamp will fit a circular rail with diameter from 1.0'' to 1.1''.
For a larger rail, you can purchase the RAM-B-231LSS Large Rail Base for circular rails with diameter from 1/2'' to 1 3/8''.
To mount to a circular rail, simple press the plastic 'U' clamp around the rail and then connect and tighten the small nut and bolt to close the 'U' clamp.
NOTE: Placing a rubber lining (not included) between the tube and the mount for a tube with a diameter less than 1'' will help the base 'grab' the rail.
IMPORTANT NOTE FOR MOTORCYCLES USES: This base is not recommended for Motorcycles due to the heavy vibration. An alternative would be the RAM-B-231 and RAM-B-149 Stainless Steel U-Bolts.
$Put some extra spending money in your pocket. Join our affiliate program
and start earning commissions on every sale referred to us. It's easy to do - complete instructions provided when approved. Sign up
here.
Got Questions?
? Pop over to the Q&A page for this item and ask away. We'll try to get you an answer in short order.
GPS Buzz
Check out the latest buzz on the PLASTIC RAIL MOUNT BASE WITH 1 INCH BALL in our Buzz section.
