RAM Mount iPhone 3G 3GS Motorcycle Mount RAM-B-149-AP6-CHU Product Detail
Category: RAM Mount RAM Mounts
Manufacturer: RAM Mount
Model No: RAM-B-149-AP6-CHU
SKU: RACB149AP6
Weight: 0.713 lbs
Share this item:
Need Assistance? We're here to help. (That's the GPS City Difference!)
For quick help selecting the right GPS unit, try our
GPS Selector Tool,
check specifications, or
compare GPS units. If you have a specific question about an
item, try entering your question using the
Questions & Answers section above - we usually respond on the same or next day. During our office hours 9AM - 6PM MDT, Mon-Fri, you can contact us using
, or reach us by phone at 1-866-GPS-CITY.
What's Included With The RAM Mount iPhone 3G 3GS Motorcycle Mount RAM-B-149-AP6-CHU? The RAM Mount iPhone 3G 3GS Motorcycle Mount RAM-B-149-AP6-CHU ships with the following items included:
RAM Mount iPhone 3G 3GS Motorcycle Mount RAM-B-149-AP6-CHU Description The RAM-B-149-AP6-CHU Apple iPhone 3G Series Chrome Motorcycle RAM Mount is a Chrome Plated Marine Grade Aluminum Mount with a Stainless Steel U-Bolt Rail Base and RAM Custom Plastic Cradle. The mount is designed with a RAM 1 inch diameter patented rubber ball and socket system that has adjustment point at the cradle and base. With a twist of the arm knob, you can move the Apple iPhone 3G Series mount to your optimum viewing position.
Apple iPhone Mount Options:
To help ensure you have the Apple iPhone 3G or 3GS Mount you require, take a look at the list of available RAM Apple iPhone 3G / 3GS mounts on the Apple iPhone 3G Mount Page or the Apple iPhone 3GS Mount Page. Here you can select from iPhone suction cup mounts, flat surface screw down iPhone mounts, iPhone car mounts, non skid weighted iPhone mounts and more bundled with the RAM-HOL-AP6 Apple iPhone 3G and 3GS Cradle.
Apple iPhone Mount Cradle Design:
The RAM-HOL-AP6 Apple iPhone 3G and 3GS RAM Mount Cradle is a High Strength Plastic Composite Cradle designed specifically to hold all of the Apple iPhone 3G (2nd Generation) and Apple iPhone 3GS devices including:
Apple iPhone 3G,
Apple iPhone 3GS
The cradle is open at the top and bottom to allow you to connect head phones and required cables plus use all of the required buttons. When mounting the iPhone 3G or iPhone 3GS cradle to a RAM Mount with their patented ball and socket system, you can easily display your iPhone 3G / 3GS in landscape or portrait view. Now you can enjoy your Apple iPhone the way it was designed - very easily.
If you are unsure of what model iPod classic, iPod nano, iPod mini, iPod touch or iPhone you have, now you can review your Apple device features on our Apple iPod and iPhone Identify Page. Once you identify your Apple iPod or iPhone, you can the select the right mount for your model.
Apple iPhone Mount Cradle Plate:
The RAM-B-238CH Chrome Plated Marine Grade Aluminum Diamond Plate is designed to connected to the back of the mount cradle. The diamond plate has a 1.0 inch diameter rubber ball connected at right angles to the plate, which connects directly to the 1 inch arm socket. The cradle includes the required hardware to connect the plate to the cradle. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the RAM-B-238 Design Drawings (pdf file).
Apple iPhone Mount Arm Design:
The RAM-B-201CH Chrome Plated Marine Grade Aluminum Dual Socket Arm is a 1 inch B size Ball Socket Arm with open socket ends. The arm is 3.0 inches long between socket centers and is finished with a Chrome Plating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAM-B-201 arm, take a closer look with the RAM-B-201 Design Drawings (pdf file).
Apple iPhone Mount Base Design:
The RAM-B-231CH Chrome Plated Marine Grade Aluminum Rail Base has a 1.0 inch diameter Rubber Ball designed to sit at right angles to the mounting rail. The Stainless Steel U-Bolt and nuts included will fit a circular rail with diameter from 3/4 to 1.0 inch.
To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black plactice covers over the exposed ends of the u-bolt.
$Put some extra spending money in your pocket. Join our affiliate program
and start earning commissions on every sale referred to us. It's easy to do - complete instructions provided when approved. Sign up
here.
Got Questions?
? Pop over to the Q&A page for this item and ask away. We'll try to get you an answer in short order.
GPS Buzz
Check out the latest buzz on the IPHONE 3G 3GS MOTORCYCLE MOUNT RAM-B-149-AP6-CHU in our Buzz section.
If you are unsure of what model iPod classic, iPod nano, iPod mini, iPod touch or iPhone you have, now you can review your Apple device features on our 
The RAM-B-238CH Chrome Plated Marine Grade Aluminum Diamond Plate is designed to connected to the back of the mount cradle. The diamond plate has a 1.0 inch diameter rubber ball connected at right angles to the plate, which connects directly to the 1 inch arm socket. The cradle includes the required hardware to connect the plate to the cradle. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the 
The RAM-B-201CH Chrome Plated Marine Grade Aluminum Dual Socket Arm is a 1 inch B size Ball Socket Arm with open socket ends. The arm is 3.0 inches long between socket centers and is finished with a Chrome Plating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAM-B-201 arm, take a closer look with the 
The RAM-B-231CH Chrome Plated Marine Grade Aluminum Rail Base has a 1.0 inch diameter Rubber Ball designed to sit at right angles to the mounting rail. The Stainless Steel U-Bolt and nuts included will fit a circular rail with diameter from 3/4 to 1.0 inch.