RAM Mount Garmin nuvi 2xxW and nuvi 465T Screw Down Plate Mount Product Detail
Category: RAM Mount RAM Mounts
Manufacturer: RAM Mount
Model No: RAM-B-138-GA25U
SKU: RAMB138GA25
Weight: 0.638 lbs
Share this item:
Need Assistance? We're here to help. (That's the GPS City Difference!)
For quick help selecting the right GPS unit, try our
GPS Selector Tool,
check specifications, or
compare GPS units. If you have a specific question about an
item, try entering your question using the
Questions & Answers section above - we usually respond on the same or next day. During our office hours 9AM - 6PM MDT, Mon-Fri, you can contact us using
, or reach us by phone at 1-866-GPS-CITY.
What's Included With The RAM Mount Garmin nuvi 2xxW and nuvi 465T Screw Down Plate Mount? The RAM Mount Garmin nuvi 2xxW and nuvi 465T Screw Down Plate Mount ships with the following items included:
RAM Mount Garmin nuvi 2xxW and nuvi 465T Screw Down Plate Mount Description The RAM-B-138-GA25 RAM Mount Marine Grade Aluminum Flat Surface Screw Down Mount consists of the 1 inch diameter ball and socket system with RAM Plastic Cradle for the Garmin nuvi 200W, nuvi 205W and nuvi 465T Series.
Garmin GPS Mount Cradle Design:
The RAM-HOL-GA25 RAM Mount High Strength Plastic Cradle is designed to hold the Garmin nuvi 2xxW (wide), nuvi 2x5W (wide) and nuvi 2x5WT (wide) Series, including the following GPS units,
Garmin nuvi 200W
Garmin nuvi 205W
Garmin nuvi 250W
Garmin nuvi 255W
Garmin nuvi 260W
Garmin nuvi 265WT
Garmin nuvi 465T
The cradle will fit around the Garmin cradle that is included with the purchase of the Garmin nuvi 2xxW and nuvi 465T series unit. All cables can stay connected to the unit while in the RAM cradle.
The RAM-B-201 RAM Mount Marine Grade Aluminum Dual Socket Arm is a 1 inch B size Ball Socket Arm with open socket ends. The arm is 3.0 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAM-B-201 arm, take a closer look with the RAM-B-201 Design Drawings (pdf file).
Garmin GPS Mount Base Design:
The RAM-B-202 RAM Mount Marine Grade Aluminum Screw Down Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate. The plate has pre-drilled holes in the base plate, including the universal AMPS hole pattern. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the RAM-B-202 Design Drawings (pdf file).
Mount Base Mounting Solutions:
Mounting hardware is NOT included with the purchase of the RAM-B-202. A semi-permanent solution for mounting this base is by using the RAM double sided adhesive disk (RAM-202PSA). The disk will hold the RAM-B-202 base in many different locations without screws.
Garmin GPS Mount Options:
To help ensure you have the Garmin nuvi 205W, nuvi 255W, nuvi 200W, nuvi 250W, nuvi 260W and nuvi 465T Mount you require, take a look at the list of available RAM Garmin GPS mounts on the RAM-HOL-GA25 Series of Garmin nuvi 2xxW, nuvi 2x5W and nuvi 465T Cradles and Mounts Page. Here you can select from suction cup GPS mounts, flat surface screw down GPS mounts, GPS car mounts, non skid weighted GPS mounts and more bundled with the RAM-HOL-GA25 Garmin nuvi 2xxW, nuvi 2x5W and nuvi 465T Series Cradle.
$Put some extra spending money in your pocket. Join our affiliate program
and start earning commissions on every sale referred to us. It's easy to do - complete instructions provided when approved. Sign up
here.
Got Questions?
? Pop over to the Q&A page for this item and ask away. We'll try to get you an answer in short order.
GPS Buzz
Check out the latest buzz on the GARMIN NUVI 2XXW AND NUVI 465T SCREW DOWN PLATE MOUNT in our Buzz section.
The RAM-B-201 RAM Mount Marine Grade Aluminum Dual Socket Arm is a 1 inch B size Ball Socket Arm with open socket ends. The arm is 3.0 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAM-B-201 arm, take a closer look with the 
The RAM-B-202 RAM Mount Marine Grade Aluminum Screw Down Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate. The plate has pre-drilled holes in the base plate, including the universal AMPS hole pattern. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the 
