| The GPS SuperStore.™ Since 1994. |
 |
Canada |
 |
|
| You are currently shopping our GPS City Canada website, which ships to Canada only. To shop our USA website or to ship Internationally, please click the green button above. Prices will be in USD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
RAM Mount Garmin GPSMAP x76 x78 x96 Cradle RAM-HOL-GA7U Specifications |
Please find below additional technical documentation and/or specifications for this item. This documentation may take the form of mechanical drawings, installation manuals, instruction manuals, and a table of specifications. |
RAM-HOL-GA7U |
The RAM-HOL-GA7 High Strength Plastic Cradle is designed to hold the Garmin GPSMAP x76, x76C, x78 and Aviation x96C Series of GPS which includes, and is not limited to, the following GPS units,
- Garmin GPSMAP 176
- Garmin GPSMAP 176C
- Garmin GPSMAP 276C
- Garmin GPSMAP 376C
- Garmin GPSMAP 378
- Garmin GPSMAP 478
- Garmin GPSMAP 196 (Aviation GPS)
- Garmin GPSMAP 296 (Aviation GPS)
- Garmin GPSMAP 396 (Aviation GPS)
- Garmin GPSMAP 496 (Aviation GPS)
All cables can stay connected to the unit while in the RAM cradle.
Placing Your GPS in the Cradle:
Place the knob of the smaller side arm of the RAM cradle into the hole in the back of the GPS. Now slide the larger arm around the edge of the GPS unit until the end of the arm 'clicks' into place at the front edge of the GPS unit.
Important Mounting Information:
If you already own this cradle, or any other cradle with a hole pattern that will match the RAM Diamond Plate hole spacing, then you require one of the RAM Assemblies listed below. If you are looking to purchase a complete mount for the above cradle, take a look at the Complete Mount list below.
This cradle does not ship with a RAM ball. To add a 1 inch ball to this cradle you need to purchase either the Aluminum Diamond Plate with 1 inch ball (RAM-B-238) or Plastic Diamond Plate with 1'' ball (RAP-B-238). If you need to mount this cradle on a 1.5'' ball system, you will require the Aluminum Diamond Plate (RAM-238). |
|
|
|
|
