RAM Mount Garmin Cradle Clip Yoke Mount RAM-B-121-GA11U Product Detail
Category: RAM Mount RAM Mounts
Manufacturer: RAM Mount
Model No: RAM-B-121-GA11U
SKU: RAMB121GA11
Weight: 0.810 lbs
Share this item:
Need Assistance? We're here to help. (That's the GPS City Difference!)
For quick help selecting the right GPS unit, try our
GPS Selector Tool,
check specifications, or
compare GPS units. If you have a specific question about an
item, try entering your question using the
Questions & Answers section above - we usually respond on the same or next day. During our office hours 9AM - 6PM MDT, Mon-Fri, you can contact us using
, or reach us by phone at 1-866-GPS-CITY.
What's Included With The RAM Mount Garmin Cradle Clip Yoke Mount RAM-B-121-GA11U? The RAM Mount Garmin Cradle Clip Yoke Mount RAM-B-121-GA11U ships with the following items included:
RAM Mount Garmin Cradle Clip Yoke Mount RAM-B-121-GA11U Description The RAM Marine Grade Aluminum Yoke Mount consists of the 1'' dia. ball and socket system with RAM Plastic Connector for Garmin Cradles.
Mount Cradle Design:
The RAM-HOL-GA11 RAM Mount High Strength Plastic Cradle converter is designed to connect to the following Garmin mount cradles (Garmin Mounts sold separately),
All cables can stay connected to the unit while in the RAM cradle.
Mount Arm Design:
The Powder Coated Marine Grade Aluminum Standard Length Double Socket Arm is 3.0'' long when measured between socket centers.
Mount Base Design:
The RAM-B-121B RAM Mount Powder Coated Marine Grade Aluminum Yoke Clamp Mount Base fits a rail diameter from 5/8 inch to a maximum of 1 1/4 inches. The 1 inch rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails.
NOTE: The rail does not need to be perfectly round to mount this base.
$Put some extra spending money in your pocket. Join our affiliate program
and start earning commissions on every sale referred to us. It's easy to do - complete instructions provided when approved. Sign up
here.
Got Questions?
? Pop over to the Q&A page for this item and ask away. We'll try to get you an answer in short order.
GPS Buzz
Check out the latest buzz on the GARMIN CRADLE CLIP YOKE MOUNT RAM-B-121-GA11U in our Buzz section.
The RAM-B-121B RAM Mount Powder Coated Marine Grade Aluminum Yoke Clamp Mount Base fits a rail diameter from 5/8 inch to a maximum of 1 1/4 inches. The 1 inch rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails.
