RAM Mount eTrex Color Series Screw Down Plate Mount Product Detail
Category: RAM Mount RAM Mounts
Manufacturer: RAM Mount
Model No: RAM-B-138-GA16U
SKU: RAMB138GA16
Weight: 0.638 lbs
Share this item:
Need Assistance? We're here to help. (That's the GPS City Difference!)
For quick help selecting the right GPS unit, try our
GPS Selector Tool,
check specifications, or
compare GPS units. If you have a specific question about an
item, try entering your question using the
Questions & Answers section above - we usually respond on the same or next day. During our office hours 9AM - 6PM MDT, Mon-Fri, you can contact us using
, or reach us by phone at 1-866-GPS-CITY.
What's Included With The RAM Mount eTrex Color Series Screw Down Plate Mount? The RAM Mount eTrex Color Series Screw Down Plate Mount ships with the following items included:
RAM Mount eTrex Color Series Screw Down Plate Mount Description The RAM-B-138-GA16 RAM Mount Marine Grade Aluminum Round Screw Down Base Plate Mount consists of the 1 inch diameter ball and socket system with a RAM Plastic Cradle for the Garmin eTrex Color Series.
Mount Base Design:
The RAM-B-202 RAM Mount Marine Grade Aluminum Screw Down Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate. The plate has pre-drilled holes in the base plate, including the universal AMPS hole pattern. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the RAM-B-202 Design Drawings (pdf file).
Mount Base Mounting Solutions:
Mounting hardware is NOT included with the purchase of the RAM-B-202. A semi-permanent solution for mounting this base is by using the RAM double sided adhesive disk (RAM-202PSA). The disk will hold the RAM-B-202 base in many different locations without screws.
Mount Arm Design: The RAM Mount Dual Socket Arm (RAM-B-201) is a B Size 1 inch Ball Dual Socket Arm, made of Marine Grade Aluminum. The arm is 3 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends.
Mount Cradle Design:
The RAM-HOL-GA16 RAM Mount High Strength Plastic Cradle is designed to hold the Garmin eTrex Color Screen Series, including the following GPS units,
Garmin eTrex Summit HC
Garmin eTrex Venture C
Garmin eTrex Venture Cx
Garmin eTrex Venture HC
Garmin eTrex Legend C
Garmin eTrex Legend Cx
Garmin eTrex Legend HCx
Garmin eTrex Vista C
Garmin eTrex Vista Cx
Garmin eTrex Vista HCx
All cables can stay connected to the unit while in the RAM cradle.
$Put some extra spending money in your pocket. Join our affiliate program
and start earning commissions on every sale referred to us. It's easy to do - complete instructions provided when approved. Sign up
here.
Got Questions?
? Pop over to the Q&A page for this item and ask away. We'll try to get you an answer in short order.
GPS Buzz
Check out the latest buzz on the ETREX COLOR SERIES SCREW DOWN PLATE MOUNT in our Buzz section.
The RAM-B-202 RAM Mount Marine Grade Aluminum Screw Down Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate. The plate has pre-drilled holes in the base plate, including the universal AMPS hole pattern. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the 
The RAM Mount Dual Socket Arm (RAM-B-201) is a B Size 1 inch Ball Dual Socket Arm, made of Marine Grade Aluminum. The arm is 3 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends.
