RAM Mount Chevrolet GMC Vehicle Laptop Mount RAM-VB-102-SW1 Features

RAM Mount Chevrolet GMC Vehicle Laptop Mount RAM-VB-102-SW1 features

• NO DRILLING REQUIRED during installation
• System mounted using the existing passenger seat rail bolts
• Installs in minutes
• Steel Plate Material used for Vehicle Laptop Mount Base and Telescoping Tele-Pole
• Marine Grade Aluminum Material used for Dual Swing Arms and Tray Mounting Plate
• Black Powder Coating on all metal parts
• RAM Mount Patented Rubber Ball and Socket Joint between base of the Laptop Tray and End of the Double Swing Arm
• Includes High Strength Plastic Universal Laptop Tray which holds any Laptop with width between 10 to 16 inches (12 to 17 inch diagonal screen) including Dell, HP, Compaq, Apple, Toshiba, Sony, Gateway, Alienware, Panasonic Laptops and more
• An included Angled 4 inch Riser (RAM-VB-SB4) moves Tele-Pole away from passenger's leg space, optimizing leg room
• Additional Angled Risers can be purchased to raise Tele-Pole and Tray System
• Base Connection designed specifically for use in the following vehicles without Deluxe Power Seats* allowing customized fit:
  • Chevrolet 2500 C/K Truck (2000-2006)
  • Chevrolet 3500 C/K Truck (2000-2006)
  • Chevrolet Suburban SUV (2000-2006)
  • Chevrolet Silverado Truck (1999-Newer)
  • Chevrolet Tahoe SUV (2000-2006)
  • GMC Sierra Truck (2000-2006)
  • GMC Yukon SUV (2000-2006)
* For Vehicles with power seats, please look at the RAMVB131A-SW1 and the RAMVB131R4-SW1 Systems

1. Remove the two front 5/16'' hex nuts that hold the passenger side seat cushion to the seat track brackets.
2. Lift the front of the seat cushion off of the front of the the seat track brackets.
3. Position the VB-102 on top of the seat track brackets so the slots in the VB-102 line up with the holes in the seat track brackets.
4. Lower the seat cushion back into place, allowing the studs to pass through the holes in the VB-102 and seat track brackets.
5. Re-attach the two 5/16'' hex nuts.

RAM Laptop Vehicle Mount Accessories

RAM Tough Tray Accessories: RAM-234-S1U The Laptop Screen Support has a flexible arm which prevents your laptop screen from over vibrating in your car or truck. RAM-234-LU Light up your key pad with a USB Laptop Computer Light. This flexible arm light powers from one of your USB ports. RAM-234-5U Connected to the side of you Laptop tray, the RAM Power Caddy will hold your AC Power Inverter and Power Suppy. RAM-B-102-PD3 If you have a PDA, you can connect a universal cradle to the side of your laptop tray to keep your PDA in easy reach.

RAM Tele Pole Accessories: RAM-VB-REM1 The Remove-A-Pole lets you remove the upper part of your Laptop Mount from your vehicle with just a pull of the pin. RAM-VB-ADJ1 The Adjust-A-Pole lets you swing and mount your Tele-Pole in the optimum position for your car or truck. RAM-VB-109-3U Extend your swing arm system another 6 inches. This Extension Arm easily connects to the Dual arm systems giving extra reach.

RAM Mounting Tray Alternatives: RAM-234-PAN1P RAM Plastic ToughDock Tray for the Panasonic Toughbook CF-29 RAM-234-PAN1M RAM Metal ToughDock Tray for the Panasonic Toughbook CF-29 RAM-234-PAN2P RAM Plastic ToughDock Tray for the Panasonic Toughbook CF-18 RAM-234-PAN2M RAM Metal ToughDock Tray for the Panasonic Toughbook CF-18 RAM-HOL-MOT1 RAM Plastic Dock for Motion Computing LS800 Tablet PC with factory MobileDock (required) RAM-HOL-MOT3 RAM Plastic Cradle for Motion Computing LS800 Tablet PC RAM-HOL-MOT2 RAM Steel Permanent Holding Cradle for Motion Computing LE1600 Tablet PC RAM-HOL-MOT4 RAM Aluminun Plate for Motion Computing LE1600 Tablet PC with factory Motion Computing Mounting Clip (required) RAM-246 RAM Aluminum LCD Monitor VESA Plate with 75mm and 100mm square hole pattern RAM-2461 RAM Aluminum LCD Monitor VESA Plate with 75mm square hole pattern RAM-111B RAM Aluminum Universal Ham Radio 2" x 6.25" Rectangular Plate