Click here to Add Your Own Review. It's quick and easy! No login required.
|
Smytty
Ingleside, Ontario
February 9, 2010
|
RAM MOUNT STEEL U-BOLT MOTORCYCLE MOUNT BASE RAM-B
Pros: simple, strong, inexpensive
Cons: can't think of anything to improve it.
Excellent compliment to RAM mount. Using this one on my
quad & thought I'd move it to my mountain bike, but for
the low price I think I'll just get another one. Very easy
to attach and remove mount to the ball. Excellent system.
0 out of 1 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Sy
Foam Lake, Sask.
February 8, 2010
|
MOTORCYCLE STEEL U -BOLT MOUNT
Appears to be a good unit. I've mounted it on the bike,
however won't see what it actually does until biking
weather!!
0 out of 1 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
cam
Winnipeg, Canada
January 8, 2010
|
SEEMS SOLID
Pros: thread caps are a good idea
Cons: needs more thread or spacers
I mounted this on my snowmobile. The machine handlebar was
too small for the mount so I had to cut off about 8mm of
thread so that the attachment would swivel properly. Not
Ram's fault but it would be nice it they threaded the steel
a bit further. Due to lack of snow haven't had many
opportunities to try it's ruggedness. Time will tell if it
stands up to our Canadian prairie winters. Other products
are interchangeable with each other so you can mix and match
like I did.
2 out of 4 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
WINDIGOBEAR
NORD DU QUEBEC
January 5, 2010
|
U BOLT
Bon complÉment avec les autres accessoires ram. fait la job
et permet À l'autre extrÉmitÉ d'etre fixÉ solidement
2 out of 5 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Me
Canada
December 26, 2009
|
WAS MISSING THE RUBBER SCREW CAPS
Cons: missing rubber bolt end caps as pictured
all it is, is a ubolt and a ball mounted to a formed piece
of metal.. not much to it.. it works just as it should..
however mine was missing the covers that go over the sharp
ends of the screws.. I emailed RAM and they were supposed
to be sending them.. but almost a month later I still have
not seen them..
It still functions fine.. but looks unfinished and the
edges are sharp. plus the elements have more exposure to
the end of the metal.
5 out of 9 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Ivanhoe
Waynesville, North Carolina
December 25, 2009
|
ALWAYS SUPERB
This is the third setup for my eTREX Legend I have
multiple offroad motorcycles. These units have worked
flawlessly for years rain, spills, and tree branches have
not be a problem.
4 out of 10 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
john5129
Tampa, Florida
December 25, 2009
|
U BOLT
Pros: what i was looking for
Cons: none
Well not much to say just it looks great and works great.
I would recommend to every one. Oh yeah great price too.
I will probably buy the phone holder too.
7 out of 12 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
SRW
Stillman Valley, IL
December 2, 2009
|
BAR MOUNT BASE
This is very functional, though not very stylist. I use one on my motorcycle and
one on my ATV. No issues to date.
8 out of 16 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Susan N.
Ontario , Canada
August 4, 2009
|
BEST PARTSB SIZE
works well with u bolt rail base
24 out of 51 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
hobo
Cinti. Ohio
July 24, 2009
|
U-BOLT MOUNT.
Pros: works on a range of handlebar sizes.
Cons: none
Works great. 2nd one I've bought. Rubber thread covers are a
good touch. They are needed.
27 out of 54 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
daspoon
las vegas
July 20, 2009
|
EXCELLENT
Cons: none
excellent
31 out of 63 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Minty
Prince Albert, SK
June 23, 2009
|
STRONG MOUNT
Pros: easy to mount. solid.
The mount is a simple, yet strong device for securing my
GPS to any ATV or snowmobile I use.
29 out of 57 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Matt
MN
June 21, 2009
|
WORKS
Does what's asked of it.
26 out of 53 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Susan
Snohomish, WA
June 17, 2009
|
RAM MOUNT STAINLESS STEEL U-BOLT BASE
Works well, but it would be nice to see it in a chrome
finish.
28 out of 58 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
dave
wisconsin
June 15, 2009
|
BEST FOR MOUNTING A GPS
Pros: easy to mount
Cons: none
fits great on my 4 wheeler
28 out of 58 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
YSAKA
US
June 3, 2009
|
RAM BALL MOUNT
Pros: mounts easily holds well
Cons: did not include sizing insert
Fast shipping good prices, Ram mounts are excellent.
Bar sizing insert was not included it has been in
others that I ordered.
29 out of 56 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Paul
Ottawa, Ontario
June 2, 2009
|
STAINLESS STEEL MOTORCYCLE U-BOLT BASE WITH 1INCH
Pros: solid, little to no vibration on the gps
Cons: rubber caps for screw ends could be tighter
Very solid on the bike, GPS reads easily as there
is minimal vibration. Easy to mount and adjust to
ideal location. One minor issue is that rubber
caps for screw ends could be tighter, used
silicone to make sure they stayed on.
26 out of 58 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Don
Elkland, MO
May 26, 2009
|
RAM MOUNT ON HANDLEBAR
Pros: very sturdy and easy to use
This is a really very good item to hold my GPS.
I feel very confident that it will hold it in
place.
26 out of 57 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Monk
Danville,Va.
May 8, 2009
|
STAINLESS STEEL MOTORCYCLE U-BOLT BASE WITH 1INCH
Pros: holds well
Cons: neck between base and ball could be ¼ to ½" longer
I used the U-Bolt Base with out the "U" bolt,the
holes lined up with two screws holding the front
of my tank on (VFR 08).It fits well to the tank
and allows the system to hold to the ball.
I got some longer screws Also it was nervously
close to the tank so I ground some metal off the
clamp that was attached to the ball.
I think adding a ¼" to the neck of the ball base
would be a better choice.
38 out of 73 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Derek
Collegeville, Pa. USA
May 5, 2009
|
RUGID GRIP
Nice no slip grip.
39 out of 74 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
billy
east hartford connecticut
May 3, 2009
|
MOTORCYCLE U-BOLT BASE
ram mount is excellent, solid, well made. fast
service.
35 out of 69 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Guns
Jacksonville, FL
March 23, 2009
|
RAM MOUNT
Works great.
34 out of 71 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Mark
Denver
February 20, 2009
|
IT'S A RAM MOUNT...
Pros: mix & match
Cons: ram mounts tend to be a little expensive
What can I say? It's a RAM Mount, which means it
fits all my other RAM stuff perfectly, is made of
solid, durable metal, and just works!
35 out of 73 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Nick
November 15, 2008
|
GOOD PRODUCT
Used on a Baja MB165 Motorbike. Good product. Expensive, but
fast delivery (2 days).
64 out of 133 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Ed P.
November 14, 2008
|
BALL MOUNT
A good solid mount that clamps down tight. Slightly oversized,
but worth every penny.
66 out of 131 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Russ
November 13, 2008
|
RAM MOTORCYCLE & ATV U BOLT MOUNT
I have u bolt mounts for my motorcycle and three of my ATV's.
Works extremely well holding the Ram mount for my Map76CS. Easy
to order, delivered in a very timely fashion and works great.
Not much else to say!
66 out of 133 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
John Rutherford
November 11, 2008
|
Great product allows many mounting choices.
70 out of 137 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
razie
July 17, 2008
|
have it on CRF 150 and Honda 599 - no problems
71 out of 140 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Travis
June 4, 2008
|
WORKS WELL
Added a piece of old tire to the curved part of the u bolt to take up space and for extra grip. Had on a DR650 with 5" arm to hold my Rino 130 and it never moved.
66 out of 134 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
