Click here to Add Your Own Review. It's quick and easy! No login required.
|
 
ldeffenb
Palm Bay, FL
October 14, 2009
|
PN-20 MOUNT BRACKET REPLACEMENT
Pros: oem pn-20 mount replacement
I originally had one of these that came bundled with my
DeLorme PN-20 mount, but it got sheared off in a bicycle
fall. I thought I'd need to replace the whole mount until I
found this site with RAM parts of all types.
12 out of 25 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Terpher
ontario, Canada
September 21, 2009
|
PERFECT FOR MY MOUNTAIN BIKE
Used this for my colorado 300 Cradle (RAM-HOL-GA27U)
purchased at the same time. Came with all the hardware I
needed and the two work together perfectly. I don't want it
to move while riding so adjustment is no concern (set and
forget). Make sure to check your handlebar diameter
(1"-1.1") and you'll be fine. I ride single track with rough
terrain and have had no problems so far (first season with
the mount) and have taken a few spills with it.
14 out of 24 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Jim
Seattle, WA
July 30, 2009
|
ALSO A GREAT PRODUCT (3 OF 3)
Cons: none
Used this in conjunction with the surface mount cradle for
mounting my Magellan Explorist 500 on my mountain bike. It
fit well even though it may not have been its intended
purpose.
23 out of 47 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
DaveT
KS
July 16, 2009
|
BICYCLE USE
Works great for using my Nuvi on my bicycle
29 out of 64 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
John Russell
Rosemere, Quebec, Canada
June 29, 2009
|
TRIAL & ERROR
Cons: missing attachment screw, messy set-up
Mounted Rail mount to by bike but had to supply my own screw to attach the
360 pronged plate to the base top. Then mounted GPS holder to the attached
mount. As the angle of the mount is fixed by the base it was trial and error to
get the right angle to match with my bike's front bag. Every adjustment required
a complete remounting. Finally I drilled a center hole in the GPS holder and can
now change the angle with one screw.
31 out of 61 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Dave
South Jersey
June 18, 2009
|
WORKS WELL
Pros: inexpensive and simple
Cons: too large dia. for most bicycles.use electric tape
This works well on a bicycle.....it probably is a little too
light duty for a motorcycle
33 out of 72 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Ginger
Vancouver
May 4, 2009
|
CONS
This item came with a mixture of bolts and lock
nuts, none of which really worked very well. So I
had to make a trip to the hard ware store to get
something to work. Also the Rail mount is too big
for my handle bars and since it's not adjustable I
had to rig up something to fill the gap. No
instructions were provided.
33 out of 66 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
Othon
Lake Mary, FL
March 16, 2009
|
NICE MOUNT BUT THICK
Pros: nice material. won't break.
Cons: too thick.
The Diamond base mount is made of good plastic.
The only problem is the thickness it adds to
whatever cradle you attach to it. Could be slimmer.
44 out of 80 viewers found this review helpful.
Was this review helpful to you?
Yes
No
|
| |
