RAM Mount Black Plastic Rose Plate with Adhesive for Mounting Suction Cups, P/N: RAP-350BU

Country:

Canada's First Canadian-Owned GPS Store! Since 1994.
Located at #3, 2010 30th Avenue NE in Calgary, Alberta.

GPS Units
RAM Mounts
Accessories
- Adapters
- Antennas
- Audio
- Batteries
- Cables
- Cases
- Covers
- GPS Mounts
- Marine Network
- OEM Accessories
- Power Packs
- RAM Mounts
- Transducers
- XM WX Satellite
Maps
Cameras
Geocaching
- Cache Containers
- Cache Log Books
- Fun Stuff
- Geo Apparel
- Hats
- Key Rings
- Patches
- Stickers
- Tools
- Trackabe Gear
Buzz
Brands
Videos
Gallery
Testimonials
Reviews
Rebates
Compare
Q&A

RAM Component > Non Ball Parts
RAM Mount Black Plastic Rose Plate with Adhesive for Mounting Suction Cups
ATTENTION! This item has a NEW & IMPROVED page format. Please click this link to view the new page.

RAM Mount Black Rose Adhesive Plate for Suction Cups

Click image for larger view
Mfg P/N: RAP-350BU
SKU: RAP350B

Share this item:

$5.68
Price shown in CAD currency

In Stock! Ships by 2PM MST today, February 9.

Qty:

This item is Brand New (not refurbished), and has a Lifetime Warranty (excluding electronic or lense components)

Found a lower price? Let us know!

POPULAR BLACK ROSE ADHESIVE PLATE FOR SUCTION CUPS ACCESSORIES!!

GPS CITY

Super Grip Dashboard Friction Mount Base

$15.95

RAM MOUNT

Clear Rose Adhesive Plate for Suction Cups

$5.20

RAM MOUNT

Round Adhesive Disk for Rose Plate

$2.69

RAM MOUNT

Clear Large Adhesive Plate for Suction Cups

$4.38

RAM MOUNT

Black Large Adhesive Plate for Suction Cups

$4.38

Even MORE ACCESSORIES below!!

JUMP TO: (Use these links to quickly jump down to a section of the page)

Accessories
Product Features

Customer Reviews
What's In The Box?

Product Videos
Product Tips

Family Tree
Alternative Units

BLACK ROSE ADHESIVE PLATE FOR SUCTION CUPS PRODUCT DETAILS	Back to Top

The RAP-350B black 3.5'' diameter round rose plate with adhesive, is a great mounting surface to attach a suction cup system. Simply stick the the plate to any surface, including curved surfaces, and then attach the suction cup to the plate. This is perfect when you need to attach your suction cup mount to your car dash vertically or horizontally, rather than to your windshield. NOTE: This pack includes 1 quantity of the black 3.5'' diameter round rose plate with adhesive.

BLACK ROSE ADHESIVE PLATE FOR SUCTION CUPS CUSTOMER REVIEWS

Click here to Add Your Own Review. It's quick and easy! No login required.
Ray Toronto December 8, 2009	ADHESIVE IS USELESS The plate itself is fine, but the adhesive disk does not stick to the dash. 4 out of 7 viewers found this review helpful. Was this review helpful to you? Yes No

Thad Nashville, TN November 21, 2009	IT LOOKS LIKE A GOOD IDEA.... Pros: it looks like a good design. Cons: it does not work at all. But, it's junk. The adhesive doesn't work. It's a nice looking mount and I wish it did work. I even ordered a couple more adhesive disks to try to make it work. I cleaned the dash with alcohol, even placed a weight on it for several hours. It's just barely sticky and the GPS will pull it off within seconds. Looking at the other reviews, I don't know why they keep selling this model. 10 out of 20 viewers found this review helpful. Was this review helpful to you? Yes No

Trail Rider Payson, AZ July 24, 2009	POOR CHOICE I selected this item to mount my Garmin to the dask of a 2009 F-250. I thought with the rose design I could mount it on a surface that wasn't quite flat. The petals on the unit are so stiff and the glue would not adhere to the dash. 27 out of 53 viewers found this review helpful. Was this review helpful to you? Yes No

Jeff Ottawa, Ontario April 25, 2009	WOULD NOT ADHERE TO SURFACE Purchased a GPS mount and am very happy with it, but bought two of these bases and they would not adhere to the surface I needed. It was a hard plastic surface on the console of a boat. Purchasing the Ram base with ball instead. A better option in the end. 46 out of 91 viewers found this review helpful. Was this review helpful to you? Yes No

phil M Toronto , Ontario March 21, 2009	POOR ADHESIVE Pros: didnt work Cons: poor adhesive POOR adhesive, would not stick to my dash. When I first saw this item I thought, What a great idea for the contour of your dash But the crappy adhesive would not stick to my dash, I cleaned my dash with alcohol prior to sticking the mount to my dash. My flat disk that came with my gps stuck to my dash quit well with only about 40 0/0 of the adhesive on the dash, doesn't look as good but works a lot better then the ram mount. of the adhesive Ram mount did not reply to my email. 47 out of 92 viewers found this review helpful. Was this review helpful to you? Yes No

Louis Victoria, BC February 23, 2009	RAP-350 FOLLOW UP Pros: good idea Cons: adhesive doesn't work Tried another adhesive disk and this time gave it more than a week to 'set'. Same result as before, virtually no adhesion, nowhere near enough to support anything. Contacted the company and they had no solution to offer. Product is a write-off as far as I'm concerned. 57 out of 106 viewers found this review helpful. Was this review helpful to you? Yes No

Louis Victoria BC February 10, 2009	ROSE PETAL MOUNT - A FLOWER WITHERED? Pros: good idea - the need is there Cons: not so sure about the execution, poor instructions Like Phil, I couldn't get the 'flower petals' to retain a bend, so I e-mailed RAM about it. I was told "bend them further, they will bend and hold the position, if you break it I'll send you a new one". The good news is that I didn't manage to break it, but the bad news is, try as I might, the petals wouldn't retain any bend at all. I tried using mild heat (hot water and placing on a heating register) no better. Finally tried using a paint stripper heat gun and that worked. A hair drier might have been better (less intense heat) 'cause I came close to melting it! Next the adhesive. Like Phil and Don, not much luck with this either, at least not so far. Followed the instructions, but a mild tug after the prescribed 24 hour cure period and it came off easily leaving just a bit of residue on the dash - very poor adhesion. Cleaned up the dash and am trying again, but after another 24 hrs it still doesn't look promising. I think it needs pressure during cure, but it's on a sloping surface, so that's out. Finally the flat (suction surface). On mine the surface looks to have a number of imperfections, so I'm not sure whether it'll hold suction or not. If the adhesive ever grabs so I can mount my Nuvi to it, I'll report back. 48 out of 94 viewers found this review helpful. Was this review helpful to you? Yes No

Phil Santa Clara, CA February 9, 2009	NOT THOUGHT OUT Pros: necessity to mount suction to anything other glass Cons: useless for mounting to anything resistant to glue To start, the adhesive supplied is useless. It barely has enough tack to stick to itself. They really should have included a high tack adhesive. The flat side is great. The suction of a mount adheres perfectly. The "flower" side is questionable. It is to stiff to conform to anything but a convex surface. I was trying to mount to a more concave spot and the plastic actually resisted the shape. Given this plus the poor adhesive made it unusable as I had planned. But even when I attempted to mount to a convex surface, the adhesive couldn't hold it more than a second and the "flower" again was almost to stiff to conform to the shape of my dash. I plan to try a little super glue or some such but haven't had the chance. I will see. Not that I have much faith unless I can heat the plastic enough to conform to my ideal convex spot. (I do not recommend heating plastic without proper ventilation.) 53 out of 101 viewers found this review helpful. Was this review helpful to you? Yes No

Don Ontario & Ontario Canada January 20, 2009	BLACK ROSE ADHESIVE PLATE I bought 4 of these to replace the weighted circle mount. The adhesive of the rose petals would not adhere solid enough to the sash to support a nuvi GPS. Also the same happened on my motorcycle fairing. There is another mount without the petals that I would sooner have had that sticks better. 66 out of 119 viewers found this review helpful. Was this review helpful to you? Yes No

BLACK ROSE ADHESIVE PLATE FOR SUCTION CUPS FAMILY TREE


RAM MOUNT Black Rose Adhesive Plate for Suction Cups	RAM MOUNT Clear Rose Adhesive Plate for Suction Cups	RAM MOUNT Black Large Adhesive Plate for Suction Cups	RAM MOUNT Clear Large Adhesive Plate for Suction Cups

Call GPS City Canada!
1-866-GPS-CITY
(1-866-477-2489)
9AM - 6PM MDT, Mon-Fri

NO PST!!
Save up to 8%!!
We do NOT charge PST on any items, just GST/HST!

Recently Viewed Items

RAM Mount Stainless Steel U-Bolt 1.25 diameter RAM-SU2512U

Holux GR 213 GPS

RAM Mount eTrex Color Zinc U-Bolt Mount

Garmin Quest 2

RAM Mount 0.25 inch NPT Thread with Single 1 inch Ball

GPS Mounts • RAM Mounts • Automotive GPS • Fitness GPS • Golf GPS • Geocaching Gear • Marine GPS • Motorcycle GPS • Outdoor GPS

Stay informed. Subscribe to the GPS City Canada email list.
Get the latest product announcements, specials, and coupons!

Customer Service
• Affiliate Program
• Returns Information
• Return An Item
• Track Your Order
• Warranty Repair
• Customer Feedback

Help Desk
• How to Order
• Payment
• Shipping
• International Orders
• Order Status
• My Account

GPS Information
• GPS Software Updates
• GPS Product Manuals
• GPS Product Registration
• What Is GPS?
• What Is WAAS?
• What Is Differential GPS?

About Us
• About GPS City Canada
• Contact Us
• History
• Employment
• No SPAM Promise
• Site Map

Sales
• Corporate
• Educational
• Testimonials