| The GPS SuperStore.™ Since 1994. |
 |
Canada |
 |
|
| You are currently shopping our GPS City Canada website, which ships to Canada only. To shop our USA website or to ship Internationally, please click the green button above. Prices will be in USD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
Dual XGPS Automotive Bundle for iPad and iPad 2 Specifications |
Please find below additional technical documentation and/or specifications for this item. This documentation may take the form of mechanical drawings, installation manuals, instruction manuals, and a table of specifications. |
| Disclaimer: Specifications shown are subject to change by the manufacturer without notice. Information provided is believed correct and true to the best of our ability, however, GPS City is not responsible
for typographical errors or incorrect data. To report any errors, please use the feedback form. |
| General |
| 1 |
Unit dimensions, WxHxD: |
2.25 x 2.25 x .75 inches (5.7 x 5.7 x 1.9 cm) |
| 2 |
Weight: |
1.8 oz (51 g) |
| 3 |
Battery: |
rechargeable lithium-ion |
| 4 |
Battery life: |
up to 8.5 hours; recharges in 2.5 hours |
| 5 |
Waterproof: |
No |
| 6 |
GPS-enabled: |
Yes |
| 7 |
Floats: |
No |
| 8 |
High-sensitivity receiver: |
Yes |
| 9 |
PC interface: |
USB |
| 10 |
RoHS version available: |
No |
| 11 |
Preloaded maps: |
No |
| 12 |
Ability to add maps: |
No |
| 13 |
Street Map Compatible: |
No |
| 14 |
Topographic Map Compatible: |
No |
| 15 |
Marine Software Compatible: |
No |
| 16 |
Bluechart g2 Map Compatible: |
No |
| 17 |
Bluechart g2 Vision Map Compatible: |
No |
| 18 |
Built-in memory: |
NONE |
| 19 |
Accepts data cards: |
No |
| 20 |
Additional: |
- 65-channel SkyTraq GPS chipset
- Accuracy: +/-2.5m (CEP)
- Fast location acquisition times: under 30 secs (warm or cold start)
- Position updates: at least once per second
- Maximum speed: 1000 kts / 1150 mph
- Maximum altitude: 18,000 m / 59,000 ft
- Bluetooth range: 33 ft / 10m
- Operating temperature: 14˚F - 140˚F (-10˚C - 60˚C)
|
| 21 |
Garmin Connect™ compatible (online community where you analyze, categorize and share data): |
No |
| 22 |
Custom Maps Compatible |
No |
| Marine |
| 23 |
NMEA input/output |
Yes (NMEA 0183) |
XG-RAM-B-316-1-AP8 |
The RAM-B-316-1-AP8 Apple iPad (Wi-Fi and 3G) Flex Rod Vehicle Floor RAM-POD-I Mount is a Marine Grade Aluminum and Plastic Composite Mount with a RAM Custom Plastic Cradle. The mount is designed with a RAM 1 inch diameter RAM ball and socket system on a 18 inch long Aluminum Rigid Flex Rod. With a twist of the arm knob, you can move the top of Apple iPad mount to your optimum viewing position.
Note: This mount does not require any drilling for installation.
Apple iPad Mount Options:
To help ensure you have the Apple iPad Mount you require, take a look at the list of available RAM Apple iPad and iPad 2 mounts on the Apple iPad Mount Page. Here you can select from iPad suction cup mounts, flat surface screw down iPad mounts, iPad car mounts and more.
Apple iPad Mount Cradle Design:
 The RAM-HOL-AP8 Apple iPad and iPad 2 RAM Mount Cradle is a High Strength Plastic Composite Cradle designed specifically to hold the Apple iPad and iPad 2 Series units
The cradle has a cut away at the bottom to allow the connection of all required cables. The cradle also enables full access to the volume and mute button on the side along with the power button and headphones jack at the top of the iPad.
When mounting the iPad cradle to a RAM Mount with their patented ball and socket system, you can easily display your iPad in landscape or portrait view. Now you can enjoy your Apple iPad the way it was designed - very easily.
Apple iPad Mount Cradle Plate:
 The RAM-B-202 RAM Mount Marine Grade Aluminum Round Plate is designed to connected to the back of cradles with an AMPS hole pattern. The round plate has a 1.0 inch diameter rubber ball connected at right angles to the plate, which connects directly to the 1 inch arm socket. The cradle includes the required hardware to connect the plate to the cradle. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the RAM-B-202 Design Drawings (pdf file).
Apple iPad Mount Arm Design:
 The RAP-B-200-1 RAM Mount High Strength Plastic Single Socket Short Arm has a B Size 1 inch Ball Socket at one end, and a Female Octagon button connection at the other. The Octagon Button end will mount on the end of the Aluminum Flex Rod, allowing the 1 inch socket to hold your device cradle or plate. The side of the arm includes a tightening knob which allows you to open and close the socket end.
Apple iPad Mount Base Design:
 The RAM-316-1A RAM Mount Rigid Arm Base consists of a RAM octagon at the end of a 18 inch rigid flex arm with seat rail base. The RAM-POD-I mounting foot plate base is designed to connect to a vehicle seat rail bolt in your Car, Truck, SUV, RV, Big Rig or bolted location. Connected at right angles to the mounting foot is an 18 inch long Aluminum Flexible Rod. This rod can hold light to medium weight items in your vehicle safely and securely. At the top of the rigid flex rod is a male RAM High Strength Plastic Octagon Button that will connect directly to a RAM Female Octagon Button Arm.
Movement of the Rigid 18 inch Flex Arm:It is important to note that the rigid 18 inch flex arm found on this mount is designed to hold an approximate weight of up to 4 lbs. With this in mind, the aluminum rod is more rigid than flexible. It is designed to be bent into position when being installed and then hold it's position. This means you cannot move the mount around once installed with just one hand. |
|
|
|
|
